X5032A×16 Vertical Knee-type Milling Machine
X5032A×16 Vertical Knee-type Milling Machine
Main Characteristics & Application
■Model X5032A×16 Vertical Knee-type Milling Machine ,has extra travel in longitudinal, operating control adopts a cantilever panel. It is suit for milling flat, inclined face, angular surface, slots by employing disc cutters, angular cutters. When mounted with the index, the machine will be able to perform milling operations in gears, cutter, helix groove , cam and tub wheel.
■Vertical milling head can be swiveled by ±45°. Spindle quill can be moved in vertical. The longitudinal, cross and vertical movements of the table can both be operated by hand and power, and it can be rapid moved. Working table and slide ways adopted quality cast hardened ensure high accuracy.
Specification: (X----longitudinal Y----cross Z----vertical)
Table size |
mm |
320 X 1600 |
T-slot(N×W×D) |
mm |
3 X18 X80 |
Table Load-bearing |
Kg |
550 |
Longitudinal travel (Manual/Power)X |
mm |
1020/1000 |
Cross travel (Manual/Power)Y |
mm |
300/280 |
Vertical travel (Manual/Power)Z |
mm |
410/400 |
Feed speed steps |
|
18 Steps |
Feed speed ranges: Longitudinal X |
mm/min |
15-750 |
Cross Y |
mm/min |
15-750 |
Vertical Z |
mm/min |
5.7-280 |
Rapid feed ranges : Longitudinal X |
mm/min |
2250 |
Cross Y |
mm/min |
2250 |
Vertical Z |
mm/min |
844 |
Distance between table center to vertical guide way |
mm |
235-535 |
Arbor diameter |
mm |
φ32 φ50 |
Min. distance from spindle nose to table |
mm |
60-470 |
Quill travel |
mm |
75 |
Distance from spindle center to column |
mm |
380 |
Max. rotary angle of vertic#xa; mso-ansi-language:EN-USal milling head |
|
±45º |
Spindle hole taper |
|
7:24 NO:50 |
Spindle speed steps |
|
18 Steps |
Spindle speeds ranges |
r/min |
30~1500 |
Main motor power |
kW |
7.5 |
Feed motor power |
KW |
1.5 |
Cooling pump power |
kW |
0.12 |
Overall size |
mm |
2327×2028×2096 |
Packing box size |
mm |
2240×2180×2320 |
Net weight |
Kg |
3250 |
Voltage/Frequency |
V/HZ |
380/50 |
Назад в раздел